• Remove the platform from pool water after use and store in an appropriate location away from exposure to weather and other harsh elements.
  

• Create a regular cleaning schedule taking into consideration the points below

• Scan regularly for damage. If the platform has been damaged, repair prior to use. Refer to Parts Code Sheet and Warranty information.

• Regularly clean with a mild dishwashing detergent mixed with warm water and rinse with fresh clean water to prevent any potential dirt and grime build up.

• It is important to only wash it with a lint free soft cloth or damp rag. This will help protect the gelcoat surface treatment and prevent scratches and degradation.

• Take your time to inspect the deck as you are cleaning it. Carefully remove any dirt and
  contaminants and look for any damage which may require repair.

• Store the platform so that the fibreglass deck is not touching the ground and make sure it is stored out of full sun for prolonged periods of time.
  

Don’t use:

• Harsh cleaners and steel scourers (or similar) as this will interfere with the integrity of the
  gelcoat and fibreglass resin

• Regularly clean with a mild dishwashing detergent mixed with warm water and rinse with fresh clean water to prevent any potential dirt and grime build up.

• It is important to only wash it with a lint free cloth or damp rag. In hard-to-reach areas, use a soft toothbrush and lightly scrub, gently removing any staining.

• Store the platform so that the S/S components will not be scratched or damaged and away from exposed weather elements.
  

• TEA STAINING
  S/S 316 material is a durable stainless steel and provides excellent resistance to corrosion and rust. Tea staining appears like rust but is merely the build-up of salt, dirt or grime that has deposited in the microscopic craters of the S/S product. Tea staining will not affect the structural integrity of your platform, it is a visual impediment which we advise to remove by following the recommendations above mentioned.
  

  Don’t use:

  • Harsh cleaners and steel scourers (or similar) as this will interfere with the integrity of the S/S composition

1. Regularly Use mild strength soap or dishwashing liquid with water to clean the ABS plastic components of the platform.

2. Use a soft cloth or paper to prevent scratches, marks and brightness degradation.

Don’t use:

• High strength cleaning agents and chemicals such as bleach, chloride or degreasers as this will impact on the longevity and durability of the material and potentially cause colour
  deterioration.